Thermal Transfusion Set - (Blood) TTS-B - Pack of 2

$309.99
In stock
Item
35-0005
Carrying Options
Carry
Latex Free badge.
Sterile badge.
This product requires Medical Device Authorization for purchase.
Latex Free badge.
Sterile badge.
  • Compatible with whole blood, component therapy (including FDP), colloids, and isotonics
  • Similar size and weight to traditional IV tubing
  • Intelligent sensing and heating elements integrated into the walls of the tubing set
  • No disruption to the fluid path or laminar flow of the fluid
  • Easy bi-directional connection to the Quantum Controller
Description

The Quantum Thermal Transfusion Set- Blood from LifeWarmer is the revolutionary IV tubing set that allows for safe, rapid warming of blood, blood products, or IV fluids without adding hardly any additional steps to the normal IV setup process. Modeled after standard blood infusion tubing, the familiar configuration allows for ease of use. The sophisticated intelligence and proprietary warming technology are integrated into the tubing system for simplicity and to reduce additional equipment and procedural steps. Roughly the same size and weight as standard blood tubing, there is almost no additional equipment burden.

The Quantum IV administration tubing is double-extruded to yield a configuration that has both an inner tubing layer and an outer tubing layer. A conductive heating element is between the two layers but does not come in contact with the fluid path or disrupt the laminar flow. The outer tubing layer acts as an insulator while the inner tubing layer transfers the heat from the heating element to the fluid path. Thermistors located in the tubing continually measure temperature and provide that input to the Quantum Controller. The monitoring and independent application of energy (heat) along the fluid path allows the Quantum to respond to varying temperature inputs from the fluid source to near the point of patient entry to ensure fluid temperature is the right temperature at delivery.

The Quantum Life Warmer, fully charged, is able to warm and maintain up to 2 units ( 900mL +/- 100mL) of cold (4ºC) blood products or IV solutions to a pre-set temperature of 100.4°F (38°+/- 2°C) at a flow rate of 100 mL/min (depending on the ambient temperature). Or, approximately 1700 mL of 20ºC IV solution to a set point of 38ºC +/- 2ºC at a flow rate of 200 mL/min. Effective warming flow rates range from 2 to 200 mL/minute depending on input fluid temperature and ambient conditions.

Specs
  • Compatible with blood, blood products, and standard IV fluids
  • Similar size and weight to traditional IV tubing
  • Intelligent sensing and heating elements from LifeWarmer integrated into the walls of the tubing set
  • No disruption to the fluid path or laminar flow of the fluid
  • Easy bi-directional connection to the Quantum Life Warmer Controller
  • Dual Spike with Vent
  • 200 micron filtered drip chamber
  • Luer-activated injection sites (2)
  • Male Luer lock adapter
  • Tubing length: 80 in.
  • Priming Volume: 22mL
  • Single Use Only, Supplied sterile via Ethylene Oxide

Dimensions:

  • TTS-B package (each): 6.5 in. x 11 in.
  • Tubing Length: 80 in.
  • TTS-B Weight (each): 2.6 oz
  • Packaged Weight (2 TTS-B & box): 11 oz

Caution: For Administration of blood, blood components, or solutions with the Quantum Blood and IV Fluid Warming System. Fluid path and areas under protective end caps are sterile. DO NOT place on sterile field. Do not use if end caps are not in place. Replace tubing per CDC guidelines and/or institutional protocols.

Testimonials

© 2019 North American Rescue, LLC. All rights reserved. All training services are offered by NAR Training, LLC. Site last updated 09/10/2019
Terms & Conditions | EULA/Terms of Use