°MEQU °M Warmer System - Starter Kit Plus

Skip to the end of the images gallery

Skip to the beginning of the images gallery

$6,494.99

In stock

Item

35-0048

Carrying Options

Easy Setup: User-friendly design; Standard Luer Locks
Lightweight: Battery with warmer only 1.8 lbs.
Instant Warming: Warms fluids in less than 10 seconds
Meets TCCC Guidelines: Warms fluids to body temperature at flowrates up to 150 ml/min.
Large Warming Capacity: Warms up to 2L of cold fluids on one fully charged battery
No Maintenance: Wipe clean and recharge after use
Field-proven: In use since 2018 in both Military, HEMS, EMS and Hospitals
Dust and Splashproof: IP54 battery and warmer
For the entire continuum of care: °M Warmer can stay with the patient for up to 72 hours
Adhesive Patch: For secure attachment close to the infusion site
Interoperable: Seamlessly supporting continuity of care across the entire patient journey

Description

A Portable Blood and IV Fluid Warming System

°MEQU has developed an IV-blood warmer for emergency transfusions. It’s a portable fluid warmer which warms up blood from cold to body temperature within seconds.

Fast set-up time and intuitive use
The set-up time is less than 30 seconds, and the user-friendly design ensures that the °M Warmer System cannot be assembled incorrectly.

High flow rates and large warming capacity
Blood and other infusion fluids can be heated from 5°C to 37°C at flowrates up to 150 ml/min. One charged battery can heat up to 2 liters of cold fluids 5°C or 4 liters of fluids at room temperature ( 21°C) to body temperature.

Low weight and compact design
The °M Warmer System has a compact design and weigh from 1.8 lbs. (820 g.) making it portable and ideal for prehospital use.

Adhesive for secure attachment close to the infusion site
The single-use warmer’s small size (3.94 in. x 2 in. x 0.79 in. / 10 cm. x 5cm. x 2 cm.) allows it to be attached to the patient close to the infusion site, using its integrated adhesive pad. This secures infusion site and reduces heat loss in the tubing.

The °M Warmer System is approved for use in helicopters and airplanes.

Specs

Kit Contents

1 x °MEQU °M Warmer (5pk)
1 x Powerpack+ Battery
1 x AC Charger

Operating Parameters

Output temperature range: 39°C (+/- 3°C at flowrates from 2-150ml/min)
Max fluid warming volume on one fully charged Power Pack Plus (output temperature of min. 36°C):

Input temperature 5°C:	Power Pack+: 2L
Input temperature 21°C:	Power Pack+: 4L

Priming volume: 3.5 ml (including tubing and luer locks)
Maximum inlet pressure: 300 mmHg

Environmental

Continuous Operation:

Relative Humidity RH:	15-95%
Pressure:	60-106kPa
Temperature:	Charging the Power Pack Plus: 10°C - + 40°C Fluid warming mode (any power source connected): 0°C - + 40°C

Storage and transportation:

Relative Humidity RH:	15-95%
Pressure:	60-106kPa
Temperature:	-20°C - + 50°C

Transient Operating Conditions:

Relative Humidity RH:	15-95%
Pressure:	60-106kPa
Temperature:	-20°C - + 40°C

Shock and vibration: Power Pack: ISO 1789 + A2 Sec. 6.4
Basic safety and essential performance: ISO 60601-1-12
Electrical compliance: ISO 60601-1

Product Specifications

Size Dimensions:

°M Warmer: W 1.97 in. x L 3.94 in. x H 0.79 in. (5 cm. x 10 cm. x 2 cm.)
Power Pack+: W 3.54 in. x L 7.09 in. x H 1.38 in. (9 cm. x 18 cm. x 3.5 cm.);
cable length: 47.24 in. (120 cm.)
AC Charger: W 2.95 in. x L 4.61 in. x H 1.73 in. (7.5 cm. x 11.7 cm. x H 4.4 cm.);
cable length: 66.14 in. (168 cm.)

Product Weight:

°M Warmer: 0.24 lbs. (110g.)
Power Pack+: 1.57 lbs. (710g.)
AC Charger: 0.55 lbs. (250g.)

Education

Testimonials