°MEQU °M Warmer (5pc)
- Sterilized, single patient use
- User-friendly design, with standard Luer Locks
- Adhesive patch for secure attachment
- Comes in a pack of 5
Description
A Portable Blood and IV Fluid Warming System
°MEQU has developed an IV-blood warmer for emergency transfusions. It’s a portable fluid warmer which warms up blood from cold to body temperature within seconds.
Fast set-up time and intuitive use
The set-up time is less than 30 seconds, and the user-friendly design ensures that the °M Warmer System cannot be assembled incorrectly.
The set-up time is less than 30 seconds, and the user-friendly design ensures that the °M Warmer System cannot be assembled incorrectly.
High flow rates and large warming capacity
Blood and other infusion fluids can be heated from 5°C to 37°C at flowrates up to 150 ml/min. One charged battery can heat up to 2 liters of cold fluids (5°C) or 4 liters of fluids at room temperature (21°C) to body temperature.
Blood and other infusion fluids can be heated from 5°C to 37°C at flowrates up to 150 ml/min. One charged battery can heat up to 2 liters of cold fluids (5°C) or 4 liters of fluids at room temperature (21°C) to body temperature.
Low weight and compact design
The °M Warmer (5pc) has a compact design and weighs from 1.8 lbs. (820 g.) making it portable and ideal for prehospital use.
The °M Warmer (5pc) has a compact design and weighs from 1.8 lbs. (820 g.) making it portable and ideal for prehospital use.
Adhesive for secure attachment close to the infusion site
The single-use warmer’s small size (3.94 in. x 2 in. x 0.79 in. / 10 cm. x 5cm. x 2 cm.) allows it to be attached to the patient close to the infusion site, using its integrated adhesive pad. This secures infusion site and reduces heat loss in the tubing.
The single-use warmer’s small size (3.94 in. x 2 in. x 0.79 in. / 10 cm. x 5cm. x 2 cm.) allows it to be attached to the patient close to the infusion site, using its integrated adhesive pad. This secures infusion site and reduces heat loss in the tubing.
The °M Warmer System is approved for use in helicopters and airplanes.
Specs
Operating Parameters
- Output temperature range: 39°C (+/- 3°C at flowrates from 2-150ml/min)
- Max fluid warming volume on one fully charged Power Pack Plus (output temperature of min. 36°C:
- Priming volume: 3.5 ml (including tubing and luer locks)
- Maximum inlet pressure: 300 mmHg
| Input temperature 5°C: | Power Pack+: 2L |
| Input temperature 21°C: | Power Pack+: 4L |
Environmental
- Continuous Operation:
- Storage and transportation:
- Transient Operating Conditions:
- Shock and vibration: Power Pack: ISO 1789 + A2 Sec. 6.4
- Basic safety and essential performance: ISO 60601-1-12
- Electrical compliance: ISO 60601-1
| Relative Humidity RH: | 15-95% |
| Pressure: | 60-106kPa |
| Temperature: | Fluid warming mode (any power source connected): 0°C - + 40°C |
| Relative Humidity RH: | 15-95% |
| Pressure: | 60-106kPa |
| Temperature: | -20°C - + 50°C |
| Relative Humidity RH: | 15-95% |
| Pressure: | 60-106kPa |
| Temperature: | -20°C - + 40°C |
Product Specifications (per °M Warmer)
- Size Dimensions: W 1.97 in. x L 3.94 in. x H 0.79 in. (5 cm. x 10 cm. x 2 cm.)
- Product Weight: 0.24 lbs. (110g.)
Education
Related Educational Materials
Testimonials
Related Products
